Wednesday, December 20, 2023

King Tigers last stand in France!

 King Tigers last stand in France 

316 & 302 Funklenk-Panzerkompanie, France 1944


Borgward IV 

As always I like to research units before I build them, many people are unaware Tiger II seen combat against Americans in France in 1944.

The Funklenk-panzerkompanie 316 fought in Normandy with tiger I, StuG and the Borgward IV, leaving the 3rd company of Tiger II behind in Saint Denis. The 3rd company Tiger II reformed as Funklenk-panzerkompanie 302 in Eure de Loir. American troops advancing east after the collapse of the front after Pattons 3rd Army breakout and collapse of the 7th Army met the Tiger II on advance to Orleans and Chartres at Chateaudun. 

 I plan to build both units this coming year as I have spare StuG, Tiger I and Tiger II kits not assigned to units currently and I have a Borgward IV B also. 

Genesis

The 6th Company /Panzer-Versuchs-und-Ersatz-Abteilung 300 (Fkl) was raised April 1st 1943 with Field Post no. 56041. According to order no. 6039/43 of OrgAbt. I OKH/GenstdH on July 13, 1943, the company was renamed Panzerkompanie (Fkl) 316. The original equipment was to consist of 36 Borgward BIV and 10 StuGs. On September 21 it was transferred to Fallingbostel, where the unit was assigned to Panzer Lehr Regimental training grounds. This was followed by exercises and trials in the regimental context at the military training area there. 

On September 30th the PzLhrRgt. Received three Tigers I , and received eight more Tigers on October 8th
These were transferred to the PzKp. ( Fkl ) 316 , which used it to test the Tiger I in the lead control vehicle detonation role.

In mid-January 1944, the order came that the 316th should be equipped with Tiger II as an experimental company, it was renamed the 1st Heavy Tank Company (Fkl) . At the end of February 1944 it was transferred to Panzer Ersatz Abteilung 500 in Paderborn for training on the new tank. Since the Panzer Jager Lehr Regiment 130 had not yet received a PzJg IV, the company had to them hand over their 10 StuGs to them from the third company. On March 14th the five Tiger II arrived, on March 22nd the personnel sent to Paderborn for training returned to the unit. 

A status report from April 2, 1944 states the following vehicles: 

5 Tiger II 
3 Tiger Ie
51 SdKfz. 301 Ausf B and Ausf C borgward IV
4 3t tractors
1 1-ton tractor 
9 heavy trucks 
3 light trucks 
1 medium-sized truck 
3 staff cars 
6 sidecar motorcycles 
2 light motorcycles 

At the end of April 1944, the Panzer Lehr Division received the order to relocate to France and remain available there as an operational reserve, 316 FKL also moved by rail, the the HQ and radio control company moved into quarters at Saint Denis-les-Ponts, next to Chateaudun. 

On May 18th, the divisional HQ ordered that the 3./PzJgLhrAbt. 130 had to return the ten StuGs. As the 5 Tiger II were hardly operational due to technical problems.

When the Allied invasion began on June 6, 1944, the Tiger IIs of III coy was left at Saint Denis for ongoing repairs and also to be part of the operations reserve for the airfield at Chateaudun from airborne attack. The I and II company’s moved to Normandy attached to Panzer Lehr.  

Combat in Normandy  

On June 8th the StuGs supported panzer Lehr grenadier regiment 902 during a counterattack, it is unknown if the Tiger Is were involved in this counterattack.

On June 11, the company proved its worth as a radio control unit, repelling a heavy British attack in several counterattacks. In the days that followed, the StuGs were mainly used to support the counter attacks with the Panzer Grenadier Lehr Regiment 902, there were only a few attacks using the Borgward units driven in the radio control process. 

On June 19, the Kp. was involved in heavy fighting around Tilly-sur-Seulles , almost all StuGs in the unit were damaged, and one was a total loss. Company commander Meinhardt was killed, as was the leader of the 2nd platoon, Lt. Fisherman.

On June 22 the unit was no longer operational, the remaining vehicles three Tiger I and 4 remaining StuG and 40 PzIV Borgward units withdrawn to Reims for refitting and placed back in reserve. The AHA (Staff I (1)) issued the order No. 27220/44, according to which the first company was renamed as Panzerabteilung FKL 302 and remain in Chateaudun with 7th Armee reserve. The company of Tiger I, remaining II company of StuG control, Borgward IV and Headquarters deployed in Reims and remained as Panzerabteilung FKL 316. On August 19- 24th 316 is withdrawn and redeployed East to Warsaw for the uprising. 

Wednesday, December 6, 2023

XI legio IV Cohort

 IV Cohort XI Legion 



May I present to you the IV cohort of the XI legion, again foundry miniatures. 


IV Cohort 



Cheers
Matt

Sunday, December 3, 2023

Merry Christmas 2023!

Merry  Christmas! 


A merry Christmas to all, I thought I would get in early this year as we have completed our tourist and wargames season for 2023 until we reopen in April 2024. A big thank you to all of our Wargame holiday and French cultural tour guests this year, we have almost totally transitioned to 3-5 night private fully guided Holidays. 

We had a very big year with guests from all over the world, again America and Australia were our top visitors, and also welcomed English, Scots, Dutch, Swiss, German, Belgians and of course French. 

Renovations continue on the Maison l’Hotel de Hercé, now onto the third and forth floor, plus attic spaces. We also commenced the exterior dependencies/outbuildings renovation this year also and more work on the garden also of course. 

During the year we had monument historic architects also visit and they have pushed back the construction date by 30 years to 1690s making the house very modern for its time, transitional baroque so that has been a shock. They also possibly think our Cave/Cellars may be much earlier and could be built in the late 15th century, due to its arches, vaulted ceilings and wide granite footing stones (800mm x 600mm), the basement kitchens, the water storage source and stone waste waster systems. 

A big year for medieval, early renaissance, ww2 and Napoleonic being the most popular periods on the table. I have also helped my friend Philip along with with the Perry translation of Valour and Fortitude for French Napoleonic players. 

Looking forward to a Australian Christmas with our family and visiting my first granddaughter in Sydney! 

All the best 

Cheers
Matt

Thursday, November 30, 2023

Egyptian T-122 SPG - Blackdog 1/72 kit review

 

 Egyptian T122mm SPG



Another purchase being assembled for the Analogue Hobbies Winter Challenge. While picking up a few bits from my Favourite French hobby supplier during the Black Friday deals I picked up the 1/72 Blackdog conversion set for the Egyptian T34/122 self propelled howitzer, it may of been used during the 6 day war, but did serve during the Yom Kippur War. 

This beast was based on a T34 chassis, in the majority T34/85 had T54 road wheels added also. Two batterys of T122 of 18 guns each did see action in the Yom Kippur. I do note that Syria also done a similar modification of the old T34 chassis. 

The Blackdog kit has the turret, gun and wheels, barrel, baffles, and barrel rest, and finally two boxes. Really nicely cast, although some fine bits that will get damaged from wargaming (the equipment rings on the rear for example). Overall though quite easy to remove from the resin sprue, quite a bit of cleanup on the wheels though to clean out the holes and shape the pear, with two of mine have bad deformity flash from mold wear I suspect and I was supplied one incorrect wheel, although it could be easily modified. With a bit of patience everything cleaned up well and assembly was straight forward. The barrel baffles also need some flash clean up, but not too bad, be careful with the barrel alignment and the baffle assembly to ensure it is square.

T122 Egyptian kit

 The kit recommends the dragon T34/85 or the Italeri. I did note that some people have used the zvesda kit also. My kit was a Italeri and upon dry fitting I needed to sand more off the bottom of the rear of the turret to get it to fit correctly. I also removed my front guards as per the surviving example in Israel. 

Overall a great addition for anyone wanting to do something different or wanting like me to add it to your Egyptian army for 67 or 73 wars. 

Overall a simple addition armour build, scoring a nine out of ten. 

Plan to get some paint on it soon, when I do my next batch of Egyptians. 

Cheers
Matt 

Sunday, November 26, 2023

Volvo C303 Pansarvärnspjästerrängbil - Gecko Heavy Industries kit review

 

Volvo C303 Pansarvärnspjästerrängbil



As I start preparing for the Analogue painting challenge I have been focusing on building kits for our “Whisky on the Rocks” Cold War Wargames Holiday from the 3rd to the 7th of May 2024. My Swedes need quite a bit of anti armour to deal with the Soviet VDV division that will oppose them. The 

Volvo C303 Pansarvärnspjästerrängbil 1/72 Gecko Resin kit

Another kit review of Gecko Heavy Industries 1/76th scale resin kit. The Volvo C303 Pansarvärnspjästerrängbil 90mm recoiless anti tank gun. The only model of this kit that I am aware of for 20mm wargaming, I needed to purchase this for my Swedes for our Cold War event “Whisky on the Rocks” at French Wargame Holidays from 3rd to 7th May 2024. 

The kit is resin with four options for the build, a complete clear resin cabin with stowed gun,  a half cabin with stowed gun, a windscreen with roll cage mounted or a firing version with folded down screen and roll frame. 
The resin spruces were simple to remove, do take care though with assembly as the instructions are not that clear, and you will require a few images from the web to fully assemble it correctly, particularly the gun mount. The roll cage will need some work if you are to get close to an actual vehicle, so I opted to fold mine down in the firing version. The clear parts are not that great and I think I will scratch a new windscreen(which will be folded down anyway…. The front seats were also incorrect from what I could see, so I trimmed the kit pieces to suit. Overall a 8.5 out of 10. 

The kit was €22 from panzerfux and worth the price I think as it is such a rare beast. Looking forward to getting some paint on it and I will possibly convert some S&S miniatures Swedish crew. 

Volvo C303 Pansarvärnspjästerrängbil Layed out




Cheers
Matt

Tuesday, November 21, 2023

Volvo c303 Tbg11 - Gecko Kit Review

 


 Volvo c303 Tbg11 - Gecko Kit Review 

Gecko Heavy Industries Volvo C303 TGB11


I purchased this beast earlier in the year when I started formulating a plan to conduct a Cold War wargaming event at French Wargame Holidays, this lead to our “Whisky on the Rocks” event being organized for May 3-7th 2024. 

This also means I need to build some Swedish Army vehicles for my Cold War Collection. Soft skins are a bit of a challenge, particularly the Volvo series of vehicles. So whilst perusing the web I stumbled upon the Gecko offering and duly purchased it along with a few other Swedish specific pieces. 

On first glance the kit is well mauled in soft grey resin with two parts in clear resin. Removal from the sprue was done with ease for the grey parts however the clear was a tough job and I had to use my saw blade to remove the sprue from the main body. 

Assembly required hot water to straighten some pieces, the frame and suspension required quite a bit of work to straighten before I glued the frame. The clear resin is very disappointing and I cannot in anyway say that it is satisfactory, I think I shall paint the entire vehicle then add glass effect rather than mask it up and hope that it is translucent. 

Positives the kit looks like the vehicle but lacks fine detail for such a pricey kit €22 from Panzerfux. The instructions are basic with no images, but simple enough to work out. The solid resin body was problematic fitting and cutting, taking more than an hour of clean up. I do note that this was Gecko Industries earliest model and the later kits have separate clear parts. 

Overall a 7 out of ten kit. I plan to get some paint on it next week. 

The kit removed from sprue, note the alignment on the chassis 


Note the huge sprue knob on the clear cast resin 

Piece removed, then wet and dry to smooth to level, a good hour of work 

Cheers
Matt